Archive for the ‘fabric marbling’ Category

This past April I was asked to do a commission for a friend of a friend, based on three things: 1) she loves our marbled fabrics; 2) she wants a fiber piece for a small area in her bathroom; and 3) she would like it to draw on the colors from the new granite counter tops. So for 6 weeks I’ve been mulling over possible designs, knowing that the final one would be based on what happened with the marbling session.

We marbled yesterday, and I worked with the colors I thought would go with the granite – gray, black, brown, russet, copper. I tried a couple of different patterns, and what follows are the pieces I came up with. Warming – they’re pretty blah in the pictures….

I chose the stone pattern to begin, for two reasons. One, I like quilting that pattern, and two, I figured this would give me some ideas. Well…..it sure did. I started snapping pictures as I was quilting. I used a Rainbow thread from Superior (of course) in a rust shade to bring out the rusts in the painting on the opposite wall of the bathroom. It was just what it needed.

The texture is incredible and no longer flat. The piece also now has a title, “Hiking,” as its future owner hikes the mountains and canyons of Arizona – and especially Sedona – often.

This is so totally different from what I had originally been thinking. I know that this will act as the center medallion of the piece, so I went looking for coordinating fabrics – in my newly organized studio, so selecting was a breeze.

Lots more ideas, as the white area is probably going to become a small bubbly stream, and I pretty much know what’s happening with the borders, but that’s for another post.

Ideas???

It has been a productive week, and I have two new projects on the agenda, but first – my finished quilt from last week. This is waaayyyy better! It was originally done many moons ago as  a marbled BOM, and I wanted the quilt, which I have always liked, to reflect the new skills I have. It’s from a block pattern from Judy Martin’s Around the Block.

I’m calling it Monet’s Marbles, based on the mottled green fabric, which I bought years ago because it reminded me of Monet. I didn’t quilt anything in the stars, because I wanted them to stand out from the rest of the quilt. Here’s a close-up:

This is one of the blocks from Judy Martin – the quilt has four and uses two different marbled fabrics.

The next project is to finish up some small wall hangings for my second mom. She spent one winter in Vermont cutting out Hawaiian designs for a potential quilt – they never made it into a quilt, and I am  trying to put them into something that Momcat can use. There is one major problem….these amazing blocks are all cut out of a heavy white polyester fabric…that ravels…………so I am using a lot of satin stitch, which also adds a slight bit of color to the blocks.

We decided on a black background to emphasize these wonderful patterns. I am hoping for one of the small wall hangings to be done for next Wednesday….we shall see…..

Many of these are original designs , and they are certainly a challenge in corners, heavy polyester, and satin stitch….but they will be gorgeous!

It’s Monday, week four into retirement, and I’ve been getting lots of loose ends accomplished on the home front. But the biggest is starting to attack what I want to do in marketing the business. It’s probably a good thing I have been thinking on this, as I need to answer a very big question first – just what do I want to accomplish for Marble-T Design, as well as my personal art goals? I can’t really start marketing successfully and fruitfully until I make some of these decisions.

I have started a list of some potential galleries and shows I would like to enter, but I find myself asking “is that really the route I want to go?” I probably should have looked seriously at this a long time ago, but, hey, school got in the way. And since Marble-T Design is 17 years old and in a new phase, I should probably also consider what we’ve done in the past and what was successful.

We’ve actually been on line with our website since 1997. We were some of the earliest in e-commerce, without even realizing it. I went through a bunch of computer programs to get the original site up, starting with Pagemill. Eventually I realized I needed to turn the design over to a professional, and Saltwater Systems has handled that beautifully over the last seven years. And we had a much wider line of products available – close to 12 sampler packages. we did a lot more marbling in our large tray, as well as a lot more custom work.

So that’s part of the “thinking” I need to do. More large trays? More shows? More product? Classes and workshops again? Just where are we taking this business? I need to be honest in my thinking about the future. Marbling in the large tray is very tiring as we have gotten older, and with the price of cotton and carrageenan going up, prices will have to go up.

Whew…..that’s a lot of questions to answer. Once again, starting to write is helping me focus on the bigger picture. So I need to start….

What do I really want to do with my art and my business? I want to make art, no question about it. I would like to sell my art, whether it be on line or actually in some galleries. I think  I am realizing I don’t want to do a lot of shows. I do have enough on my resume to show the work has been accepted, but I will probably only look at two or three a year. As for the actual business, I want to be able to bring in a certain amount of money each month to help with traveling during retirement. I’m starting with the idea of $500 additional a month, and moving from there.

That means looking seriously at outlets. Ebay has been steady, but I would like it to do more. So we need to marble more pieces and packages. I have sold a few pieces of fabric on Etsy, but this needs to be seriously marketed. We’ve been selling on Ebay for probably 7 years and we have a good steady family of customers, but I want it to generate more sales.

I haven’t really looked seriously at marketing my work on Etsy, and I think with the TAFA List, I can make a good start. So I think at this point a goal for this week is to list potential products for Etsy and read everything I can about Etsy and The Textile and Fiber Arts List.

The other big thing is we are a sponsor for The Sketchbook Challenge for July, and probably for a few months after that. This will drive more traffic to our website, The Art of Fabric. This means getting the site updated and ready for additional traffic in July. So also this week is spending time learning Dreamweaver to take care of a lot of small changes that will update the site.

THIS WEEK:

Finish Dreamweaver class for making changes to my website

Make the changes to the website

Etsy products, increased Ebay ideas

Reading about Etsy selling and developing strategies

Reading through everything on The Textile and Fiber Arts List and developing concrete plans

I’m interested in the thoughts of those of you selling on line – favorite sites? Suggestions? Pitfalls?

Sometime this past autumn, I posted a picture of a quilt completed at least 10 years ago, asking for suggestions on quilting it. I had used invisible thread (waaaayyyy before the improvements in threads) and did basic in-the-ditch quilting. Pretty darn blah. So I took ALL the quilting out, including taking the binding off, and washed it to hopefully remove the shadow lines.

Silly me, I was thinking of having it available for sale at the art show we did in November. Well, that didn’t happen, so it moved to my “to do” list for when I retired, and then to the top of the list as I saw the studio coming together. I thought of attempting some feathers, because most of what I have done for quilting has been stippling or stitch-in-the-ditch.

Before I could start, I discovered this video on stippling, and I was hooked. Sharon Schambler had an hour-long video (actually longer) with 9 free motion patterns she has used in one of her quilts. Easy to watch and very easy to do!

I chose the second pattern, used some variegated thread from Superior (of course – I am totally hooked!), and started. I wasn’t sure I could really do this. So voila –

I was thrilled at this point, because I realized 1) I could do this, and 2) the quilt was going to look SO much better!!

This is the completed center. I’m not going to quilt the marbled stars (unless someone has a really good idea for me?? Hint hint…). I ABSOLUTELY love it! I’m doing a variation of the pattern on some of the side strips, and it’s coming along well. Hopefully pictures this weekend…..

As of yesterday I was finally able to finish the studio remake by actually cleaning off my sewing table, which had become the repository for all the loose ends. I can finally start working again. Hubby marbled on Thursday and enjoyed having a more organized and larger space. Here’s the “before” pictures….

We have (well, had – it’s gone the way of Craig’s List) lots of storage shelves that could be configured in a variety of ways. This is most of the marbling stuff, just kind of packed into various boxes, and not really easy to find anything. The shelves continue next to it, with more cloths, plastic, and trays. We had more of this shelving in the closet.

So much storage in the closet – lots of different containers and boxes collected over the years – fabric is kind of organized by color, but it’s a pain to get to. To the left is an old baker’s rack (like about 36 years old – from before I got married, and it has a new home).

The small chest of drawers belonged to my dad – it is now in the closet, with all the cloths and plastic and towels. Much easier to get to things and it’s now keeping everything more organized.

This was the worst part of the studio – my actual sewing area. I felt enclosed and couldn’t really move around. It was not a comfortable area, and this was the main reason for re-doing the studio.

And now……

This is where all the marbling supplies were – in storage that is more efficient and actually takes up less floor space. I have fabric out by color, files from school, art supplies in one of the canvas storage bags, and patterns all sorted.

My sewing table is now under the window with much better light and room to move around. I am now right next to the cutting board and ironing board. Art books and lots more storage.

You can see more of the sewing area here.

Hubby in his new space, organizing the latest marbled fabrics. Lots of stuff is stored under that cutting table! You’ll see some of the fabric up on eBay this week……

You would think, based on a hubby in retail for so many years, that I would have given packaging more of a priority. Well, no…seems like I’m always rushing to get items ready for shows, and I neglect the packaging. That’s not to say I don’t give a lot of thought to the overall set-up of the art space…just not the packaging.

I had a bit of an epiphany with this upcoming show. I’m sitting in the meeting about the show, listening to explanations of selling, how good a show it is, and the great location. When suddenly I hear “People are gift-buying. They’ll splurge for folks back home with gifts for the holidays.”

Okay, seems obvious. Then hubby says, “Well, they’re not going to buy pieces of fabric, so I’m not sure just what we’ll bring.” That made me fairly depressed. Fabric is what we do: fabric for quilts, wearables, framing – we’ve spent a lot of time brainstorming how folks could use our marbled fabric.

Then it hit. Buy fabric as gifts for the folks in your life who do fiber-related arts. Just package it so it looks like a gift from the heart, not just a piece of fabric in a plastic bag.

Duh. Why did this take so long? We have done so many small shows over the years, including demonstrations, and not once have we packaged ourselves for gift sales. This was definitely something to think about. How could we take a gorgeous piece of fabric that to a non-fiber person just looks like extra pieces of cloth on the table? I started thinking about how I buy small pieces of art, as well as how my local quilt shop packages your purchases. I love having the “back story” or a piece of artwork. In my hutch sits a container of all the small papers of stories collected over the years.

Okay, put together the story of the fabric, the care of the fabric, and ways to contact us (hard to believe we haven’t done all of that in the past).  Wrap the fabric piece with a bow so that it looks special, with the “story” tucked into a fold of the fabric. When purchased, wrap in tissue paper before bagging it.

I played on the computer to come up with something that would have contact information as well as a story about the creation and care of the fabric. With aiming at non-fiber purchasers, I need to provide as many reasons as possible while a piece of “art cloth” would be a great gift. Here’s the “story:”

“This art cloth is a blue silk crepe georgette  fabric, hand-marbled in a contemporary wave pattern, 19 inches by 21 inches. Edges are serged solely to prevent fraying of the fabric. This material has been pre-treated and heat-set, so it is ready to go for your project. If you need to clean this fabric, use warm water and a gentle soap – no Woolite or harsh cleaners, no dry cleaning. Use a dry iron and some Magic Sizing to eliminate wrinkles. Try this as a table-topper, just the way it is, quilt it, or use it in an art quilt for nature elements– lots of imaginative possibilities! This is a great pattern to quilt by itself with lots of decorative threads.”

Along with this is every contact piece – Twitter, Facebook fan page, blog, email and website. Save everything to your computer, and then all you need do is add the new story for each of your pieces.

Here’s the fabric and its packaging:

I will say the piece was up on Etsy for less than an hour before it sold, and all the new pieces of fabric packaged this way have had more views than previously in the shop.

The proof will be the show on November 20; how will people react, and will they buy? Thoughts? What have you done to package your items? Have you noticed a difference in sales?

I had an Etsy store about two years ago, with a grand total of four items in it. I kinda let it go inactive, since I wasn’t doing anything with it. After doing tons of marketing reading last spring and summer, I reopened the store, still not quite sure what I would be selling in it. I started with a few marbled cards from my digital work, put up some marbled remnants, and then I had a bit of an epiphany.

I’m selling art on the website, why not also list some of that cool stuff in my Etsy store? So I did…and then I realized I could list some great art cloth fabrics, and write better descriptions and provide better pictures. And…I sold a piece of hand-marbled art cloth that had been listed for maybe an hour.

Cool. It’s a gorgeous piece of fabric, and the picture doesn’t really do it justice at all.

But I had the nicest message from the buyer: I have no idea what I’ll do with this shimmer of color, but I will honor your work and its beauty.

Wow. How cool is that? I know this amazing piece of fabric is going to a good home, because I always wonder about my babies and where they end up.

I will say there are other great piece in my Etsy – pieces I’ve held on to because they’re so gorgeous, but I also know the reality is I will probably never get to make anything with them. As it is, I put three pieces back in the drawer for me and “someday”…and I’ll be listing a few more tomorrow.

Ebay continues to be slow but somewhat steady. I’m sure the economy isn’t really helping us, but hopefully the holiday season will be better to us. Cafe Press – well, it takes time to rotate items and create the graphics for them, and time is one thing I don’t have a lot of these days. Plus, I gather from all that I have read on Cafe Press that you have good luck with sales if you have an active store – not something we can budget for at this time.

I would love to hear from all of you out there who are running your businesses on the proverbial shoestring. How do you decide where your dollars go? What have been good outlets for you? And how do you maximize every dollar spent?

PS – Newsletter will go out sometime this week. If you’re not a subscriber, you won’t be entered for a chance to win some marbled fabrics. Check the box at the top for more information!

Awright, so they’re not technically WIPs. But I haven’t shown all of them on here before, and I really do love them. And close observers will recognize the blog heading as the fabric in “Salmon Run.”

“Salmon Run” returned from its several-month engagement in Alaska at the Cordova Historical Museum. I love having it back – I am so fond of the fabric.

Here’s a close-up of the quilting.

You also haven’t seen my latest piece, “Bamboo Grove,” in a full shot.

This piece had so many techniques I hadn’t tried before. I am reconsidering the tops of the bamboo stalks…I may decide to take the leaves off and try another way of attaching them to increase their fullness. So I guess it still is a “work in progress.”

What am I working on now? I am doing an art show on November 20 with the Tucson Art and Craft Association, so I am preparing fabric for that, as well as requilting a few small quilts. I am thinking of revising my still-unfinished “Iceberg” piece from several years ago into a series of Icicles for Road to California – I have till December 15. I can still use all the techniques I had planned, just in some different forms. I am still thinking about the next “large” piece with marbled fabric and don’t quite know what it’s going to be……I have some really great large pieces of fabric lying around.

But…I also have about four other quilts in various stages that I need to get to! Such decisions we all have….what’s waiting on your list of to-do?

Yesterday I wrote about what’s happening with the bamboo piece. Here’s a sneak piece of it in VERY rough form:

Now to today’s story – my piece for “My World in Black and White,” a show curated by Anne Copeland, like around 2003. This was a challenge issued on the QuiltArt list, and I decided to try something. Here’s the piece:

This was the first show where I realized I had to pay more attention to the theme. Mine was a more abstract look at black and white. We marbled a three-quarter-yard piece of unpolished white satin in blacks and whites. There was still a little orange left in the tray from a previous piece, so the name became “Black and White with a Hint.” I cut five strips and quilted them, following the marbled patterns. You can see the hints of orange.

At this point, I really didn’t know what form this was going to take. I decided to stagger each of the strips, but it was pretty boring with just the strips. That’s when the “hidden” architect in me took over. I marbled some ribbon, serged the edges of the ribbon to carry the serging motif through, and attached it to some strips of gray cotton. I did eight strips all together, some of them plain with just a meandering quilting line, and some with the ribbon, and then I wove them through the other strips.

I liked how it was shaping up, and now I had to deal with a hanging system, as well as finishing the bottom. I figured I wanted some beads to hang at the bottom. I went to the local bead store and found these teardrops – have NEVER seen anything like them since then.

If you look closely, you can see how each strip gets hand-stitched to the ones around and underneath it. I figured I would use a plexiglass rod for the hanging system. I marbled some thinner ribbon, and with careful measurements attached the various lengths at the top, with a bead embellishment.

I learned a lot, as I seem to do on every piece, and this is still one of my favorites – my first piece to travel (to Ontario, CA as well as the online exhibit), my first piece that was professionally appraised, my first piece that “hung” in a very different style, and my first ribbon (for entering, but none-the-less still special!).

I am really enjoying revisiting these pieces and their stories. I hope you enjoy as well.

If you’ve been following along on my bamboo piece, you’ve seen these leaves in progress – all eight hours of work on them. After finishing – I hope – the stitching this Saturday, I “dissolved” the stabilizer from Superior Threads. Here it is after all the stuff washed away, before I cut apart the leaves.

It certainly hung together okay. I starting cutting apart the leaves, saving all the pieces of thread fabric to create the grasses at the bottom of the bamboo stand.

I got more and more excited as I cut, because the leaves were looking fantastic. I think I have something for the future.

There are some problems – they aren’t as stiff as I would have liked, so I am having to revise my hanging system for the bamboo. But they look great – I used some RazzleDazzle in the bobbin and got nice shiny veins. I have two shades for the leaves, as I have a front and back for the original silk leaves.

Superior Threads

I’m trying for a close-up….(click it to see closer….)

Now i just have to put it all together…maybe it’ll be done for next week Wednesday……

I have lived in New England, specifically Vermont and New York, for a good amount of my life. My biggest regret living in the desert is not seeing Autumn each year. A number of years ago I had a chance to put some work in a small gallery in Jericho, Vermont – the town my husband’s family settled in the 1600s. The gallery is also the original home of Snowflake Bentley, the man who photographed snowflakes and proved no two snowflakes are alike. I wanted to do something that would honor autumn in New England.

We marbled a piece of polysatin in autumn colors. Now there are some purists in quilting and marbling who insist 1) everything has to be cotton, and 2) you can’t marble polyester. Well, I’m a great one for breaking the rules…which is interesting, because I was such a linear, rule-follower growing up. But not where my art is concerned, evidently. We have discovered since we started marbling that polys take the marbling and paints extremely well, and almost all our art pieces are done on some type of polyester. The detail is exceptional, and the colors are consistently bright.

Once we had the great colors, then it was…hmmm, how to show this off? This would be my third piece in my Gaia series, and I knew I wanted to keep the weaving aspect. But I didn’t want a square or rectangle of strips. So I looked to weave just the top part and have the lengthwise strips hang down in points.

The draft looked like it would work, but the copper thread was not cooperating. This was before I really knew much about threads and machine tension and adjustments…so I did a lot of ripping out to try and get the stitched somewhat even. The other problem was the serging. Again, I wanted to use some decorative threads, but the machine wasn’t cooperating. And…I wanted to have points at the end of my strips, and I wasn’t sure how to manage that.

Gaia 3: Autumn

Now the visual effect was what I wanted. I cut the length-wise strips so the pattern would not be broken. This is a traditinal marbled pattern, the reverse of the peacock/bouquet design – which we call “bat wings,” because that’s what it reminds us of. The vertical strips are attached until about 6 inches from the bottom, because I wanted the effect of leaves/branches in the wind. This was actually the second piece I added beads to, and they worked out quite well.

The serging is rough. I have since learned all kinds of tricks to smooth out what I want for a decorative edge, and the piece I am working on now reflects all that I have learned. This is one where I wish I had better pictures – and more of them. If you visit the website, you can enlarge the pics there for a better view. The piece sold about a year later to a quilting buddy. I still miss it, as it is so New England autumn.

Be sure to become a subscriber! We have a drawing (good ole Random Generator) before each newsletter for a free Sampler 1 package. See the form to the right. Join the family!

That’s design repeats, not repeat columns…..I think I finally got this figured out. Readers of the blog know I’m interested in getting more mileage out of my marbled fabrics. I’ve been trying to see what would happen in Photoshop, and I end up with some great ideas. But for me to pursue licensing, I need to be able to create repeats…..so I think I’m on my way. Now, these are all copyright, so if you’re thinking about “borrowing,” don’t think any further….Nope.

I don’t know that I even have the original quilted piece of this fabric, but I have played around with it a lot. But here’s the deal…I’m posting these and then I want you to go to our Facebook fan page (link on the right) and tell me which one you like the best, and what you might do with it. Let’s see just how creative everyone is!

Here it is in its first incarnation…looks pretty springy to me. Version A:

Fabric A

Here’s Version B:

Version C: (Wouldn’t this look great with gold?

Version C

Version D:

Version D

Version E:

Version E

Version F:

Version F

Version G:

Version G

Can you tell I had a lot of fun? I have learned that if I get stuck on a project, to just put it away to “ferment,” and eventually I solve the problem. Now get over to Facebook and Vote!!!

Gaia 2: Beginnings. Photography Steven DeVol

I love this piece, absolutely my favorite so far of everything I’ve ever done. I really had no idea going in to this just what would emerge…everything was trial and error, but thankfully, very little error.

This piece started as a result of finishing a commission that was done on red unpolished satin. Six half-yard pieces were marbled, with my using a total of four of the finished pieces. My idea was to create a piece that would represent the volcanic origins of the earth and the goddess Pele. For the longest time this piece was known simply as “Pele.” I used a different marbling pattern on each of the half-yards, as I wanted interest within the piece.

Ever since my first teaching job on Maui, I have been fascinated with the stories of Pele, the Fire Goddess, and I was always on the lookout for the Lady in White when I drove home over the Pali at night. I didn’t realize it then, but Pele and fire have woven their ways through much of my work.

I really had no idea how these were going to weave together. I experimented and ended up with this weaving, starting with a tighter bottom and then “exploding,” much like magma does as it reaches the surface and becomes lava. The only problem with this shape came as I realized I had to figure out a way to anchor everything together. The strips are heavily hand-stitched together on the back – twice, as I discovered I had to make it much tighter to hold the weight of the piece.

A free-form pattern makes up the bottom four strips. The next four strips are the “wave” pattern, and the last four strips are what we call the ”fountain” pattern. A fourth pattern of a very small feather was ultimately not used in the weaving.

Each piece was sandwiched and serged with a variegated thread before any quilting was done. I liked the effect from the variegated thread, and I use that technique a lot now. But I have since changed how I put the individual strips together, with serging only one side or none at all, leaving another design element for later. The free-form strips were quilted using a variegated Sulky thread to accent the pattern. The four “wave” strips were quilted by following an initial curved line throughout each of the pieces and then coming back with a different metallic thread to accent the marbled pattern. The four “fountain” pieces were quilted in a distinctly different shade of thread to accent the eruption of lava.

Gaia 2: Beginnings. Photography Steven DeVol

Now, you have to understand I hadn’t done a whole lot of machine quilting to this point, beyond stitch-in-the-ditch. This was brand new territory for me! But ultimately I was hooked….I quilt most of my marbled fabrics now, and the patterns can be very zen-like to quilt. Here’s another close-up:

Close-up of Quilting

I truly love this piece, and I know I’ll never get another one just like it. It’s a little bold for any of our walls where we are living now, but one day, when I retire and the place is a little bigger, it will hang again!

For those of you who haven’t subscribed to our newsletter, we are doing a drawing again from all our subscribers for a FREE Sampler Package 1. You can visit our website to see this. Be sure to sign up – the form is at the top on the right.

And…tell me the story of one of your favorite pieces. I’ll include stories in a future “Sunday Stories” post.

I love reading blogs about the stories behind the art we create. It occurred to me I could document (primarily for myself) the process and story behind some of our pieces in our gallery on the website. There is a page on the site with some very early quilts, including an original design for a math program I participated in.

This is the PRIME quilt – the name of the program was Promoting Reform in Mathematics Education, and it was a total of 6 weeks over three summers at the University of Arizona. We gave this quilt to our professors at the end of the third summer, and it still resides in the math department.

The center is the program itself, with the first few prime numbers. Each triangle attached to it is the name of one of the professors, with a little graphic representing each one; Fred, for example, had the calculator. The four corners are the teacher assistants we had, and each of the blocks is made with marbled fabric and a PRIME number of pieces. Let me tell you, the block with 37 pieces was a doozy to do.

We all signed the back of the quilt and presented it with the message that a puzzle was built into the quilt. Five 9 years later I filled in two of the professors as to what the puzzle was – the prime number of pieces. This was a fun quilt to design.

The quilt that started me on my present journey with marbled fabric is Gaia 1: Interdependence.

Gaia 1: Interdependence

This is kind of a cross between a traditional stone pattern, some basic combing of paint, and some chevron pattern. When the fabric came out of the tray, I liked the interplay of the turquoise with the earthy colors. The turquoise reminded me of the gifts from the earth. I don’t know why I started to cut into strips – maybe just because I wanted to try weaving something. I really don’t remember.

I had five strips and nothing was working. Then I decided to just weave it back and forth and see what would happen. I liked where it was going and cut the strips in half so I would have more to work with. I used a thin batting (which I since use exclusively) and backed it with a fossil fern fabric. Then I started to quilt, just by following the lines of the fabric. I went for three hours without stopping because I was loving how it was working.

I didn’t want bindings. I thought it would detract from the message of interdependence of all the elements on earth. Then I hit on serging the edges. Now this was before I really understood what a serger can do. I still hadn’t figured out rolled edges. But I knew I wanted some type of variegated thread, so I just experimented.

Then came trying to hold it together. I used a LOT of pins and very carefully pulled the weaving off the design wall onto the quilting table upside-down and started to stitch all the strips together. Let me tell you, that took forever….

Well, the problems weren’t over. A basic sleeve wasn’t going to work for hanging, so I spent a few weeks trying to figure that out. I ended up buying a set of napkin rings with an earthy feel to them and looked for a piece of bamboo. The big problem was anchoring the napkin rings to the strips – with a lot of delicate sewing….but the piece has hung for five years in an office in Tucson with not a single problem.

I knew when this was finished I was on to something. The bamboo I am currently working on will be the fourth in the Gaia series of weavings. I do want to do more…the images I saw of rice paddies in southern China would make another interesting weaving…..

Like so many of you, I am a regular reader of Robert Genn’s Twice Weekly Letter. This latest one looked at the traditional master-apprentice role in the arts, and I was particularly taken with some of the thoughts, especially since marbling has always followed this road. Apprentices worked with masters for years, learning and absorbing every trick and skills through watching – and later on by doing.

This made me think of how we get our own art educations, a topic near and dear for so many of us. I’m self-taught in virtually everything I have done artistically. I would hazard a guess that this is true for most of us baby boomer women. We were encouraged to go into paths that would support us or provide for families, with little thought as to what would make our hearts sing. As we’ve gotten older we have become more expressive.

Self taught. It seems to be fine in so many fields to say you are self-taught – tutored in life. But not in art. At least for me, I still feel intimidated when I see in a CV of someone in an art show all their schooling and formal coursework in the arts. My own art education early on consisted of a few art projects in elementary school and then a “class” as an elective in high school where we churned out particular projects. But nothing in creativity. Which ties in to a recent article in Newsweek on the dearth of creativity in modern classrooms and education.

I’m rambling, I know. But I’ve had to learn how to be creative, to break through the “OMG, what will it look like?” phase of making art. Would working with a master have helped this? I don’t know, but it probably wouldn’t have hurt any.

Who are our masters in the arts today? From whom do we study and learn? Enter the Internet, the cheap equalizer to getting an art education. The joke in our family always was that if my dad wanted to learn how to do something new, he would read a book. Well, I got that gene. I read everything I can get my hands on if it’s something I am really interested in. But that can get to be expensive, although still cheaper than a formal education or coursework.

The internet has opened up huge resources for us. I started on TV with Sewing with Nancy and Eleanor Burns and Kaye Woods. I picked up all kinds of hints – and reasons why something I was already doing (through guesswork) wasn’t working. Like many of us, I have taken workshops when I can afford it. Jennie Rayment and her muslin creations still stick in my mind – such possibilities for texture!

Just one of Jennie Rayment's books

The first professional workshop on marbling was with Galen Berry (over a year ago) and it was wonderful – lots of questions answered, problems solved, and energy renewed. We started to zoom ahead in our skills.

Galen Berry

Then I went to the School of Threadology with Superior Threads. Yes, I know I rave about their threads, but the professional education I received over the three days with Bob and Heather Purcell was priceless. My work has taken a dramatic turn for the better – and I don’t break thread anymore….

School Of Threadology

Now I’ve discovered Interweave and their dvds on quilting and other artistic endeavors. Better than a book because I can see things actually being done.

Interweave

I watched a leaf tutorial by Heidi Lund and already picked up a bunch of hints to try something totally new for my bamboo piece. Carol Taylor’s video on her Arc-i-Texture techniques had me making a new quilt last night to try out the ideas…and I must say I’m loving it! And Susan Brubaker Knapp’s video on machine quilting corrected a whole bunch of errors I have puzzled over.

Carol Taylor

Susan Brubaker Knapp

Heidi Lund

And of course we can’t forget YouTube. I have been devouring and studying very closely the wealth of marbling videos on line.

So my question to you is: What’s the best professional development you’ve ever attended – the one that has changed how you do your art? I want to know!

PS – all of these recommendations are unsolicited – they’re just stuff I have learned from and appreciate – nothing comes to me as a result of you checking these out! (OK, FCC – happy?)